SHAPE Wireless Directors Kit Wooden Handles Anton Bauer Plate W-ICON is based on a universal bracket system that will secure the position of your monitor with a 1/4-20 captive screw. The monitor support allows the possibility to install a PARALINK or TERADEK wireless data receiver and an ANTON BAUER battery plate. This product offers a perfect handheld solution for directors to carry around.The monitor can also be installed on a gobo stand to keep your setup in the same place.The monitor position can be rotated forward and backward using a red ratchet key to secure the position. Behind the monitor, there's a universal cheeseplate with 1/4-20 and 3/8-16 threaded holes. The cheeseplate can move forward and backward with the red knob screw to provide an easy access to the battery rear connectors of the monitor. The handle grips are made of Canadian maple hardwood and a high quality varnish top-coat to provide more durability. The wooden handles are attached to the monitor support with SHAPE standard ARRI rosette placed on each side of the monitor support. With this technology, the handle can be easily place up or down with a simple press of your thumb, and you can positionned it backwards so the monitor can easily hold on a flat surface
SHAPE also included in this bundle a strap made of rubber and nylon to provide you a better support and to increase the security for the monitor. SHAPE design the monitor bracket to be mounted on a gobo stand, and it can also be mounted on our ICONBLOC 15mm Spigot 750 to be installed on rods.
Based on a tension system to move the monitor bracket and the cheese plate forward or rearward to adjust the monitor position
Red ratchet key to secure the lock of the bracket and the cheese plate position
Two 1/4-20 captive screw to secure the monitor position on the angle bracket
Included an ANTON BAUER battery plate
The monitor position can be rotate forward and backward with a red knob
with our patent push button technology and
Handles are attached with SHAPE standard ARRI rosette on each side on the monitor support
Wooden handles can be place up and down with our 360 degrees rotation
Includes a universal cheese plate with 1/4-20 and 3/8-16 threaded holes
The cheese plate can be move forward and backward using a red knob for easy access to the batteries rear connectors of the monitor
PARALINX or TERADEK wireless data receiver can be install in the cheesplate behind the monitor , using the adaptor supplied with the receiver
Handles can be positioned backwards for a desktop configuration; can easily hold on a flat surface
Can be combined with the ICON 15mm RODBLOC Spigot 750 to install on rods
The monitor support can be installed on a Gobo stand or C-Stand and fixed with SHAPE red ratchet key
Includes the new SHAPE strap with rubber padding for good grip and the best support for your director's kit!
* Only compatible if the monitor has threaded holes underneath
Universal bracket for monitors between 7 and 9inches
Includes removable spigot with rubber plug for use during handheld set up
Compatible with most monitors used by directors as SMALL HD, ATOMOS , TV LOGIC , iKAN, SONY, IKEGAMI, ASTRO DESIGN, LILIPUT, sound devices and more.