Contemporary Research QMOD-HDMI RGB HDTV Modulator IPTV Encoder

  • Product Code: QMOD-HDMI RGB
  • Availability: In Stock
  • $2,795.00

Contemporary Research QMOD-HDMI RGB HDTV Modulator IPTV Encoder with one non-encrypted HDMI and one RGBHV/Component input, sets a new standard for sports, motion and digital signage encoding. Dual hardware scalers accept content up to 1080p, shapes VGA signage for edge-to-edge presentation, and compensates for non-broadcast and PAL refresh rates. Able to deliver two HD programs in one channel, the QMOD-HDMI RGB can also output the content as a Multicast or Unicast IPTV stream. Options include dual-language SAP audio, easy front-panel setup and alternate audio and NTSC video inputs. Web setup, monitoring, and firmware updates are available via USB and Ethernet ports. Two-across mounting offers up to four programs per rack space, with the ability to mix models to handle HDMI, SDI, Component, RGBHV and NTSC video sources. Version 2.3.4 Update reduces end-to-end RF latency to 500 ms and adds RTP protocol for IP streaming.


One HDMI (non-HDCP) input, up to 1080p video and audio
One RGBHV/Component input, up to 1080p video
Two Composite video inputs for encoding, captioning, or EAS use
Two sets of stereo and SPDIF coax audio inputs

Creates SD and high-definition MPEG-2 and/or H.264 streams at 480i, 480p, 576i, 720p, or 1080i for distribution.
Accepts stereo or PCM audio and converts to Dolby Digital AC-3/, with SAP dual-language capability.
Embedded captioning from Line 21 data on composite video inputs.
Dual hardware scalers enable precise formatting of digital signage for edge-to-edge presentation. Units accept up to1080p 30/60 Hz and PAL video, as well as, various computer graphics resolutions while delivering programs at a fixed resolution.
Dual-channel operation is standard, creates one physical channel with two HD programs.

Delivers a fully agile QAM 64/256 digital cable channel 2-135
Up to 268 HD Programs, 134 Channels per system
Streams Multicast or Unicast IPTV from GigE Ethernet port
Distributes channel over an on-site broadband cable system with adjustable output level up to 29 dBmV, compatible with all CATV format broadband systems

Set up with front-panel buttons and easy to use menus; including inputs, encoding, channel, and RF options or use onboard Web page for setup and monitoring
Update firmware from USB or EthernetFan cooled, with variable speeds
Includes compact switching power supply
Saves power and rack space using efficient ½ rack width design
Mounts in optional 1RU single (RK1) or dual (RK2EZ) 19” rack mount kits
Meets RoHS safety and California energy standards