• Blackmagic Design Camera Fiber Converter CINEURSANWFRCAM

Blackmagic Design Camera Fiber Converter CINEURSANWFRCAM attaches to the back of your URSA Mini or URSA Broadcast camera. In addition to converting all of the audio, video, camera control and talkback into fiber, it also adds professional studio camera controls to the back of your camera. You get control for return feeds, dual intercom controls with the ability to mix in program audio, record, focus and iris controls, headset connectors, audio and more. The camera converter also includes a VLock mount plate on the top for attaching accessories such as a professional Blackmagic Studio Viewfinder. The Blackmagic Camera Fiber Converter has connections for your Ultra HD camera feed, 3 HD return feeds, full remote camera control, PTZ, multiple channels of talkback, tally and more!

If you’re working in a studio or out at a large sporting venue, you often need to place cameras far apart. While SDI connections are common, the limited range of SDI makes it hard to use it over long distances. Traditionally, you would need to run multiple cables and expensive extenders for power, talkback, tally, video and audio.

This makes set up incredibly complex and increases the chances of a technical problem. Now you can solve this problem by converting all essential connections and power into a single convenient SMPTE fiber cable that can run incredibly long distances. That means cameras can be placed anywhere and connected back to broadcast trucks parked outside of a venue or back to a central control room in a studio. Best of all, SMPTE fiber is a global broadcast industry standard so you can use cables and connection points that are commonly available. Blackmagic fiber converters are also affordable, so traditional broadcasters, new web broadcasters, AV producers, houses of worship and educators can all use the same high end broadcast technology!

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Blackmagic Design Camera Fiber Converter CINEURSANWFRCAM

  • Product Code: CINEURSANWFRCAM
  • Availability: In Stock
  • $4,015.00


Related Products

Teradek 10-1307-1 OMOD COMMAND RT+

Teradek OMOD COMMAND RT+

Teradek OMOD COMMAND RT+ 10-1307-1 is a module for your RED DSMC2 camera that adds 3-axis wireless l..

$6,395.00

DekTec DTA-2115B-GOLD All-standard VHF/UHF/L-band Modulator StreamXpress

DekTec DTA-2115B-GOLD All-standard VHF/UHF/L-band Modulator StreamXpress

DekTec DTA-2115B-GOLD All-standard VHF/UHF/L-band Modulator enables the 8x 8-MHz firmware variant (s..

$10,995.00

Magewell Pro Convert HDMI Plus 64020

Magewell Pro Convert HDMI Plus 64020

Magewell Pro Convert HDMI Plus 64020 Standalone HD HDMI to full bandwidth NDI encoder, 1-channel HDM..

$795.00

Datavideo RMC-300A Remote Controller

Datavideo RMC-300A Remote Controller

Datavideo RMC-300A is a multi-functional remote control unit Controls up to 24 Datavideo PTZ/block c..

$1,595.00

Tags: Blackmagic, Design, Camera, Fiber, Converter, CINEURSANWFRCAM, Video, Production