As a broadcast engineer or A/V professional you likely have diverse needs when it comes to managing SDI signals within your environment - for monitoring, distributing, switching, multiplexing, and processing 3D in real time. Until now, you have been forced to purchase different devices to perform these tasks. The new

Matrox MC-100 solves all these challenges in one inexpensive, easy-to-use device. Matrox MC-100 is a dual SDI to HDMI mini converter that supports a wide range of display resolutions through 3G, Dual Link, HD, and SD-SDI. This
single portable unit can be used as a HD-SDI switcher, a distribution amplifier, a multiplexer, and a 3D processing unit, making it the most versatile mini converter on the market. It should be in every video professional’s toolbox.
Monitor SDI on inexpensive HDMI displays Take your SDI video signal with 16 channels of embedded audio and convert it to HDMI. Whether you’re using RGB or YUV, Matrox MC-100 maintains the full 10-bit video spectrum of the signal, up to a resolution of 1920 x 1080. Eight channels of embedded audio are supported on HDMI, selectable between the first and second set of 4 pairs.

Configure using On-Screen-Display Quickly and efficiently configure your Matrox MC-100 via the on-screendisplay
(OSD) menu available on all outputs. There is no need for a computer connection. Every MC-100 feature is accessible through the OSD, which is controlled by three buttons directly on the unit. User-defined presets can be
saved to dip switches for even quicker setup.

Distribute and amplify SDI signals Configure MC-100 as a distribution amplifier to boost the strength of your SDI signals by 300 metres on SD-SDI, 100 metres on HD-SDI, and 70 metres on 3G-SDI. Switch between two SDI signals Toggle between two SDI inputs at the touch of a button, glitch-free as per
SMPTE RP-168. MC-100 is also a loss-of-signal switcher. You can configure the device to automatically switch to the second valid input if the first one is lost or becomes invalid. As an added benefit, the LEDs on MC-100 illuminate green when valid sources are detected

- Two SDI inputs and two SDI outputs for 3G, Dual Link, HD, and SD
- HDMI output for monitoring
- On-screen-display controlled by easily accessible hardware buttons for straightforward configuration on your HDMI and/or SDI monitors
- Multi-format SDI signal distribution
- SDI signal amplification - 300 metres in SD, 100 metres in HD, 70 metres in 3G
- Glitch-free switching between two HD-SDI feeds
- Loss-of-signal switching in case of invalid or lost input signal
- Multiplexing of two HD-SDI video signals into a single 3G-SDI feed
- Realtime 3D processing including Horizontal Image Translation (HIT) and vertical offset adjustments
- Industry-standard 3D analysis modes - Anaglyph, Difference, 50/50
- Comprehensive 3D output format support - Sideby Side, Over/Under, Frame Packing (HDMI 1.4a)
- Video time base corrector and frame synchroniser for 3D workflows
- 16 channels of embedded audio on SDI
- 8 channels of embedded audio on HDMI, selectable between the first and second set of 4 pairs
- Synchronisation of both SDI inputs
- Convenient programmable dip switches for user defined presets
- Power cord with locking connector included
- Three-year hardware warranty and complimentary telephone support