The LS-80 LED System is a great all-in-one par can system for any mobile entertainer. This popular American DJ lighting system features four LED par cans; one red, one green, one blue and one amber. Each par can uses 12x 1-Watt LEDs producing bright color washes of light. Each par can is rated at a extremely long 50,000 hour life.

The LS-80 LED System uses two T20F chase/foot control system. Users can operate this easy-to-use chase controller directly on from T20F controller or with the foot switch. The T20F features: 20 built-in programs - 10 normal chase programs and 10 chase programs with fade time, 7 pre-set scenes, black out, plus master/slave and DMX operation.

Great for any performer on the go, the LS-80 LED System is easy to set-up and take down. Plus, with low heat emitting LEDs performers stay cooler on stage.

System includes:
4x Par 38 polish Par Cans (1x Red, 1x Green, 1x Blue, 1x Amber)
1x T20F Chase Controller system with foot control
1x LTS-4 Light Stand (extends up to 10 feet/3M)

Par Can Specifications:
Each Par Can has 12x 1W LEDs rated at 50,000 hr. life
25-degree beam angle
Power Consumption: 70W max total system (120V)
Power plug and chase controller power input will vary depending on country or region
Single par can dimensions (LxWxH): 7"x7"x8.75" / 180x180x220mm

T20F Features:
4-channel chase control pack (Four 3-prong Edison sockets)
Great for the working Musician or DJ
DMX, 3pin, XLR In/Out for linking to other T20F''''''''''''''''s
20 built-in programs: 10 normal chase programs and 10 chase programs with fade time
7 pre-set scenes (holding the "Stand By" button down for 3 seconds):
Scene 1= Channel 1 On
Scene 2= Channel 2 On
Scene 3= Channel 3 On
Scene 4= Channel 4 On
Scene 5= Channel 1 and 3 On
Scene 6= Channel 2 and 4 On
Scene 7= All On
Stand By function (Blackout)
Chase button to select from the 20 built in chases
Master/Slave and DMX operation modes
Chase by way of Audio (sound activation) or 3, preset, chase speeds
Max Load: 5A per channel or 15A max
Circuit breaker protection
Built-in, reversible, hanging/truss bracket
Voltage: 120VAC / 60Hz or

T20FC "Foot Controller" Features:
Chase selection foot switch
Stand By (Blackout) foot switch
Unit Dimensions: Inch:1x0.75x0.25 / 21x18x6.6mm
Unit Weight: 1.68kgs / 4 lbs.